Professional drill stand features a milled 120mm x 220mm base table fitted with a fence and scale. The fence accepts our separate 28132 vise MS-4. A strong, geared rack/pinion feed has a return spring with excellent feeling for effortless drilling. The practical depth gauge is scaled up to 40mm. The MB 200 collar accepts Proxxon tools with 20mm nose diameter.

The steel column is solid rod, 20mm diameter x 280mm, placed to give 140mm throat capacity. This ground-finish column is hard chromium plated.

All sliding surfaces are CNC machined. The dovetail ways have three setscrews, permitting the operator to set the optimum balance between low stroke friction and low yaw effect. When the dovetail ways are properly set up, the MB 200 excels when using solid tungsten carbide drill bits for PCB drilling, also with very fine HSS drill bits.

The entire dovetail way assembly may be rotated up to 90 degrees and clamped according to a graduated angular scale. As with its companion MB 140/S drill stand, the base of the MB 200 is drilled and tapped to accept the KT 70 XY-table for accurately positioned drilling.

All our Proxxon MICROMOT 12vDC and 240vAC drill/grinders including 28481, 28485, 28472, 28462, 28500, 28510, 28512 may be clamped in this drill stand. No motorized tool and no vise is included with this product.

The vise is made of die-cast zinc and has three machined sides. The jaws are 2" (50 mm) wide and 25/64" (10 mm) high and provide horizontal and vertical V-slots for holding round work pieces. The maximum clamping width is 1 11/32" (34 mm). The anvil top with a cast-in hole is optimal for supporting small and fine parts when drilling 28132

PROXXON COMPOUND TABLE KT70

27100