Disc Sander TG 250/E
Sands long edges, end sections, radii, mitres and by turning work piece over - accurate flat surfaces at right angles. Used on soft and hard woods, non-ferrous metals, steel, plastics Plexiglass and fibreglass , cork and rubber. A simple chart indicates the recommended speeds on different materials.
Sturdy construction:
Main body of ribbed die-cast aluminium ,not a steel tube or sheet metal construction. Table of die-cast aluminium with machined surface. Tilts 15° inwards and 45° outwards a scale facilitates accurate adjustment. Table mitre gauge supplied as standard. Machined backing disc - driven by a twin ball bearing spindle. Standard, commercially available sanding discs fix firmly and can be replaced quickly. A dust collection adapter for attaching a vacuum cleaner/dust extractor is included.
Technical Data:
220 - 240 Volt with drive via toothed belt reduction ratio 7.3:1. Electronic speed control approx. 250 - 750 rpm, disc diameter 250 mm. Max. sanding height 135 mm, table 275 x 105 mm tilts 15° in, 45° out. Overall size without table 330 x 280 x 230 mm. Complete with mitre gauge and 2 each sanding discs of 100 grit and 240 grit.
NO 28 060
|
|
Coolant Collection Tray & Plastic container with stop cock Not Included ( These are sold separately )
NO 28 970
|
Grit 80
|
5 pcs.
|
NO 28 972
|
Grit 150
|
5 pcs.
|
NO 28 974
|
Grit 240
|
5 pcs.
|
NO 28 976
|
Grit 320
|
5 pcs.
|
This Relativity™ Australian-made product replaces the Proxxon German-made product 28188 which was discontinued in 2012/2013.
The vented one litre container is mounted on a stainless steel support bracket which matches the mounting centres of TSG 250/E or TG 250/E.
The control valve regulates flow through 5mm bore flexible PVC tubing, to a port on the sander's splash guard.
This product is manufactured entirely from plastics and stainless steel, eliminating corrosion.
We suggest you add the Relativity™ Australian-made collection tray 44054 which replaces the Proxxon German-made product 28189 discontinued in 2012/2013.
Included components:
Technical specifications
This Relativity™ Australian-made product replaces the Proxxon German-made product 28189 which was discontinued in 2012/2013.
Durable coated steel tray (colour may vary) with drain nipple fitted, dual stainless steel RHS legs drilled for bench mounting.
Useful when water cooling is used during sanding of metals and plastics.
Also used by jewellers to collect the lemel of precious metals during wet or dry sanding. Radiused corners assist 100% lemel recovery.
The sander is supported clear of any collected water and particulates, on four pedestals, o-ring sealed to the tray.
We include a length of 10mm ID flexible plastic tubing and a 90-degree drain elbow, to allow routing of the drain from the tray's drain nipple to a below-bench waste bin (not supplied).
The stainless steel RHS legs allow the sander often to be used without attaching it to the bench, but offer four counterbored holes for bench attachment if preferred. Unlike the discontinued German product, you may now move the machine without breaking the water-seal.
The four support pedestals with o-ring seals include stainless steel screws and nuts.
Included components:
Technical specifications
Optional with coolant system for wet sanding of glass, stone, tiles and steel.
|
|
Table size: 275 x 105 mm with slot for mitre gauge and tilts up to 45°. | |
250 mm disc, surface machined and with double ball bearing spindle. |